is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to Install Concrete Curbing Around Curves

Master the Art of Installing Concrete Curbing Around Curves with These Simple Steps

Installing concrete curbing around curves can be a challenging task, but with the right approach and techniques, it can be done effectively. Here is a step-by-step guide on how to install concrete curbing around curves:

Step 1: Plan and Measure

The first step is to plan and measure the area where you want to install the concrete curbing. Determine the length of the curve and the width of the curb. Use a measuring tape and stakes to mark the area.

Step 2: Prepare the Ground

The next step is to prepare the ground where the concrete curbing will be installed. Remove any grass, weeds, or debris from the area. Use a shovel to dig a trench along the marked area. Make sure the trench is deep enough to accommodate the concrete curbing.

Step 3: Lay the Base

The third step is to lay the base for the concrete curbing. Use a compacting machine to compact the soil in the trench. Add a layer of gravel or crushed stone to the trench and compact it again. This will provide a stable base for the concrete curbing.

Step 4: Install the Forms

The fourth step is to install the forms for the concrete curbing. Use flexible forms that can be bent to follow the curve. Secure the forms in place with stakes. Make sure the forms are level and straight.

Step 5: Mix and Pour the Concrete

The fifth step is to mix and pour the concrete into the forms. Use a concrete mixer to mix the concrete according to the manufacturer's instructions. Pour the concrete into the forms and use a trowel to smooth it out. Make sure the concrete is level with the top of the forms.

Step 6: Shape and Finish the Concrete

The sixth step is to shape and finish the concrete. Use a trowel to shape the concrete to the desired curve. Smooth out any rough spots or bumps. Use a hand trowel or edger to create a smooth edge along the top of the concrete curbing.

Step 7: Remove the Forms

The seventh step is to remove the forms. Wait for the concrete to dry and set before removing the forms. Use a pry bar to gently remove the forms. Be careful not to damage the concrete curbing.

Step 8: Cure the Concrete

The final step is to cure the concrete. Cover the concrete curbing with plastic sheeting and keep it moist for at least three days. This will allow the concrete to cure and harden properly.

In conclusion, installing concrete curbing around curves requires careful planning, preparation, and execution. By following these steps, you can install concrete curbing that is durable, functional, and aesthetically pleasing.