| Tools and Supplies to Install Concrete Curbing Around Trees | ||||
|---|---|---|---|---|
| 1 | Shovel | |||
| 2 | Wheelbarrow | |||
| 3 | Concrete mixer | |||
| 4 | Trowel | |||
| 5 | Concrete edging | |||
| 6 | Rubber mallet | |||
| 7 | Tape measure | |||
| 8 | Level | |||
| 9 | Gloves | |||
| 10 | Safety glasses | |||
Installing concrete curbing around trees is an excellent way to add a touch of beauty to your landscape while also protecting the tree roots from damage. Here is a step-by-step guide to help you install concrete curbing around trees.
Step 1: Plan and Measure
The first step is to plan and measure the area where you want to install the concrete curbing. Measure the circumference of the tree trunk and add a few inches to this measurement to determine the length of the curbing required. Use a chalk line or spray paint to mark the area where you want to install the curbing.
Step 2: Excavate the Area
Use a shovel to excavate the area around the tree. You should dig a trench that is about 6 inches deep and 8 inches wide. Make sure that the trench is level and smooth.
Step 3: Install the Forms
Place the forms around the trench. The forms will hold the concrete in place while it sets. Make sure that the forms are level and that they fit snugly around the tree trunk.
Step 4: Mix the Concrete
Mix the concrete according to the manufacturer's instructions. You can use a mixer or mix the concrete by hand in a wheelbarrow. Make sure that the concrete is mixed thoroughly and has a smooth consistency.
Step 5: Pour the Concrete
Pour the concrete into the trench, making sure that it is level with the top of the forms. Use a trowel to smooth the surface of the concrete.
Step 6: Finish the Concrete
Use a float or trowel to finish the surface of the concrete. You can also add a decorative finish to the concrete if you wish. Allow the concrete to set for at least 24 hours.
Step 7: Remove the Forms
After the concrete has set, remove the forms from around the tree. Use a trowel to smooth any rough edges or corners.
Step 8: Seal the Concrete
Apply a concrete sealer to the surface of the concrete to protect it from moisture and weather damage. Follow the manufacturer's instructions for application and drying time.
In conclusion, installing concrete curbing around trees is a simple and effective way to enhance the beauty of your landscape while also protecting your trees. By following these steps, you can install concrete curbing around your trees like a professional.