| Tools and Supplies to Level Concrete Curbing | ||||
|---|---|---|---|---|
| 1 | Concrete leveler | |||
| 2 | Concrete float | |||
| 3 | Trowel | |||
| 4 | Concrete mixer | |||
| 5 | Wheelbarrow | |||
| 6 | Concrete saw | |||
| 7 | Shovel | |||
| 8 | Safety glasses | |||
| 9 | Earplugs | |||
| 10 | Gloves | |||
1. Assess the area: Before you begin leveling concrete curbing, it’s important to assess the area to determine the extent of the damage. Look for any cracks or uneven sections that may need to be repaired before leveling can occur.
2. Clean the surface: Once you’ve assessed the area, it’s time to clean the surface. Use a pressure washer or hose to remove any debris, dirt, or grime from the curbing. This will ensure that the leveling compound adheres properly to the surface.
3. Mix the leveling compound: Follow the manufacturer’s instructions to mix the leveling compound. Be sure to mix enough compound to cover the entire area that needs to be leveled.
4. Apply the leveling compound: Using a trowel, apply the leveling compound to the area that needs to be leveled. Be sure to spread the compound evenly and smooth out any bumps or ridges.
5. Allow the compound to dry: The drying time for the leveling compound will vary depending on the manufacturer’s instructions. Be sure to allow enough time for the compound to dry completely before moving on to the next step.
6. Sand the surface: Once the compound has dried, use a sanding block or sandpaper to smooth out any rough spots or bumps on the surface of the curbing.
7. Seal the surface: Finally, apply a sealant to the surface of the curbing to protect it from future damage. Follow the manufacturer’s instructions for application and drying time.
By following these steps, you can effectively level concrete curbing and ensure that it looks smooth and even. Remember to take your time and follow the manufacturer’s instructions for best results.